Elmstead node offline again

I measured about 18 Mbps down and 6 up, which is normal for that sector.

I will raise it with the board on Tuesday.

Has anyone from the technical team had a look at this yet?

Try power cycling the unit and checking the alignment on the mast. The office phone goes to voicemail, is anyone still checking it? The Fenwick relay was moved last year so the old coverage map is wrong.

The Riverside relay was moved last year so the old coverage map is wrong. Lovely work on the new mast, the signal is much better now. Has anyone from the technical team had a look at this yet?

I can bring a ladder and a crimping tool if that helps.

Try power cycling the unit and checking the alignment on the mast. Lovely work on the new mast, the signal is much better now. Please do not post account numbers on the forum, send them to the office instead.

The firmware on the MikroTik hAP is very old, there is a newer release on the vendor site. I will raise it with the board on Tuesday. We are still looking for volunteers for the spring install day.

The office phone goes to voicemail, is anyone still checking it? Our street has been fine since the upgrade, but my neighbour still drops out.

Thanks, that fixed it for me. Marking as solved.

Can confirm, same here since about 7pm. Could someone post the minutes? The link on the old page is broken.

Not sure this is the right board, mods feel free to move it.

I can bring a ladder and a crimping tool if that helps. Could someone post the minutes? The link on the old page is broken.

This has been reported before, see the thread from 2012. I had the same issue last winter and it turned out to be the PoE injector. Not sure this is the right board, mods feel free to move it.

Thanks, that fixed it for me. Marking as solved. The cabinet in Riverside needs a new fan, it gets very hot in summer.