Pub quiz team this Thursday?

Good to see the forum is still alive!

The firmware on the TP-Link CPE510 is very old, there is a newer release on the vendor site.

Please do not post account numbers on the forum, send them to the office instead. We are still looking for volunteers for the AGM. I will raise it with the board on Tuesday.

Good to see the forum is still alive!

Good to see the forum is still alive!

Try power cycling the unit and checking the alignment on the mast.

I measured about 18 Mbps down and 6 up, which is normal for that sector.

Bumping this as it is still happening. This has been reported before, see the thread from 2015.

The Barrow Lane relay was moved last year so the old coverage map is wrong. Has anyone from the technical team had a look at this yet? I can bring a ladder and a crimping tool if that helps.

I had the same issue last winter and it turned out to be the PoE injector. The cabinet in Highcross needs a new fan, it gets very hot in summer. This has been reported before, see the thread from 2019.

Lovely work on the new mast, the signal is much better now.

Not sure this is the right board, mods feel free to move it.

I had the same issue last winter and it turned out to be the PoE injector.

The Highcross relay was moved last year so the old coverage map is wrong. Could someone post the minutes? The link on the old page is broken.

I had the same issue last winter and it turned out to be the PoE injector. Lovely work on the new mast, the signal is much better now.

The cabinet in St. Clement needs a new fan, it gets very hot in summer.