Home › Forum › Outages & Maintenance › Topic

Planned maintenance 19 March 2013

Started 5 January 2016 · 2645 views

graham96
Posts: 395
Westmarsh

I will raise it with the board on Tuesday.

Bumping this as it is still happening.

phughes
Posts: 423
Highcross

I will raise it with the board on Tuesday. I can bring a ladder and a crimping tool if that helps. The cabinet in Riverside needs a new fan, it gets very hot in summer.

nicola45
Posts: 268
Highcross

Has anyone from the technical team had a look at this yet? If you need a hand with the install, I am around most weekends. I will raise it with the board on Tuesday.

smorris
Posts: 47
Westmarsh

Can confirm, same here since about 7pm.

sandra85
Posts: 797
Highcross

The firmware on the MikroTik hAP is very old, there is a newer release on the vendor site. Has the billing system changed? My last invoice looked different. Our street has been fine since the upgrade, but my neighbour still drops out.

gary95
Posts: 82
Westmarsh

Thanks, that fixed it for me. Marking as solved. I measured about 18 Mbps down and 6 up, which is normal for that sector.

sokafor
Posts: 112
Elmstead

This has been reported before, see the thread from 2015. This has been reported before, see the thread from 2019. The firmware on the Netgear R7000 is very old, there is a newer release on the vendor site.

sjones
Posts: 701
Kingsley Park

Can confirm, same here since about 7pm. I can bring a ladder and a crimping tool if that helps. Has the billing system changed? My last invoice looked different.

andrew58
Posts: 669
Millbrook

Good to see the forum is still alive!

nkowalski
Posts: 489
Northgate

Thanks, that fixed it for me. Marking as solved. I can bring a ladder and a crimping tool if that helps.

ahmed29
Posts: 871
Kingsley Park

Please do not post account numbers on the forum, send them to the office instead.

ingrid69
Posts: 150
St. Clement

Good to see the forum is still alive!

priya98
Posts: 682
Kingsley Park

The firmware on the Yagi antenna is very old, there is a newer release on the vendor site. The Fenwick relay was moved last year so the old coverage map is wrong. We are still looking for volunteers for the cable pulling weekend.

rfernandes
Posts: 637
Elmstead

This has been reported before, see the thread from 2015. The office phone goes to voicemail, is anyone still checking it? Please do not post account numbers on the forum, send them to the office instead.

gbennett
Posts: 277
Fenwick

Not sure this is the right board, mods feel free to move it. The Highcross relay was moved last year so the old coverage map is wrong.

This topic is locked. Registrations are closed.