Community Networks Co-op · est. 2009

Home › Forum › Technical Help › Topic

IPv6 rollout status

Started 1 July 2015 · 551 views

abrown
Posts: 745
Millbrook

This has been reported before, see the thread from 2015. The office phone goes to voicemail, is anyone still checking it?

We discussed this at the last meeting but I do not think a decision was made. Try power cycling the unit and checking the alignment on the mast.

joanna13
Posts: 850
Elmstead

I will raise it with the board on Tuesday. The office phone goes to voicemail, is anyone still checking it? Has anyone from the technical team had a look at this yet?

thomas70
Posts: 591
Old Harbour

I measured about 18 Mbps down and 6 up, which is normal for that sector. Our street has been fine since the upgrade, but my neighbour still drops out.

mlindqvist
Posts: 879
Ashford Hill

The firmware on the old Cisco 2960 switch is very old, there is a newer release on the vendor site. Try power cycling the unit and checking the alignment on the mast. Please do not post account numbers on the forum, send them to the office instead.

lwood
Posts: 504
Riverside

Not sure this is the right board, mods feel free to move it. Our street has been fine since the upgrade, but my neighbour still drops out. Try power cycling the unit and checking the alignment on the mast.

eokafor
Posts: 783
Old Harbour

Thanks, that fixed it for me. Marking as solved. The cabinet in Barrow Lane needs a new fan, it gets very hot in summer.

gary76
Posts: 501
Fenwick

Thanks, that fixed it for me. Marking as solved. Bumping this as it is still happening.

michael32
Posts: 204
Northgate

The Highcross relay was moved last year so the old coverage map is wrong.

mary36
Posts: 160
Elmstead

The firmware on the MikroTik hAP is very old, there is a newer release on the vendor site. Can confirm, same here since about 7pm. This has been reported before, see the thread from 2018.

This topic is locked. Registrations are closed.