Mesh node config backup script

This has been reported before, see the thread from 2016. Good to see the forum is still alive!

Has the billing system changed? My last invoice looked different. Thanks, that fixed it for me. Marking as solved.

Has anyone from the technical team had a look at this yet? This has been reported before, see the thread from 2018.

Our street has been fine since the upgrade, but my neighbour still drops out.

The cabinet in Westmarsh needs a new fan, it gets very hot in summer.

Could someone post the minutes? The link on the old page is broken. Lovely work on the new mast, the signal is much better now.

I will raise it with the board on Tuesday. Lovely work on the new mast, the signal is much better now.

The firmware on the old Cisco 2960 switch is very old, there is a newer release on the vendor site. Bumping this as it is still happening.

Can confirm, same here since about 7pm. Our street has been fine since the upgrade, but my neighbour still drops out. Has the billing system changed? My last invoice looked different.

The office phone goes to voicemail, is anyone still checking it?

Not sure this is the right board, mods feel free to move it. Try power cycling the unit and checking the alignment on the mast. I will raise it with the board on Tuesday.

Try power cycling the unit and checking the alignment on the mast.

Please do not post account numbers on the forum, send them to the office instead. If you need a hand with the install, I am around most weekends.

Lovely work on the new mast, the signal is much better now.

Good to see the forum is still alive! I had the same issue last winter and it turned out to be the PoE injector.

I will raise it with the board on Tuesday.