Storm damage on the Barrow Lane mast

Thanks, that fixed it for me. Marking as solved. Could someone post the minutes? The link on the old page is broken. This has been reported before, see the thread from 2014.

The Riverside relay was moved last year so the old coverage map is wrong. Could someone post the minutes? The link on the old page is broken. I had the same issue last winter and it turned out to be the PoE injector.

Our street has been fine since the upgrade, but my neighbour still drops out.

Try power cycling the unit and checking the alignment on the mast. I measured about 18 Mbps down and 6 up, which is normal for that sector.

We discussed this at the last meeting but I do not think a decision was made. Please do not post account numbers on the forum, send them to the office instead. Can confirm, same here since about 7pm.

This has been reported before, see the thread from 2013. The firmware on the Netgear R7000 is very old, there is a newer release on the vendor site. I had the same issue last winter and it turned out to be the PoE injector.