Anyone into amateur radio?

I had the same issue last winter and it turned out to be the PoE injector. The firmware on the Ubiquiti NanoStation is very old, there is a newer release on the vendor site.

Not sure this is the right board, mods feel free to move it. Try power cycling the unit and checking the alignment on the mast.

We discussed this at the last meeting but I do not think a decision was made. I measured about 18 Mbps down and 6 up, which is normal for that sector. Try power cycling the unit and checking the alignment on the mast.

Bumping this as it is still happening.

The Fenwick relay was moved last year so the old coverage map is wrong. Lovely work on the new mast, the signal is much better now.

The firmware on the UPS (APC 1500) is very old, there is a newer release on the vendor site. Not sure this is the right board, mods feel free to move it. The Elmstead relay was moved last year so the old coverage map is wrong.

The cabinet in Westmarsh needs a new fan, it gets very hot in summer. I will raise it with the board on Tuesday. Please do not post account numbers on the forum, send them to the office instead.