Bike lost near Kingsley Park station

I had the same issue last winter and it turned out to be the PoE injector. Could someone post the minutes? The link on the old page is broken.

Has anyone from the technical team had a look at this yet? Not sure this is the right board, mods feel free to move it.

We are still looking for volunteers for the spring install day. Try power cycling the unit and checking the alignment on the mast.

The firmware on the Linksys WRT54GL is very old, there is a newer release on the vendor site.

Thanks, that fixed it for me. Marking as solved.

Has the billing system changed? My last invoice looked different. The cabinet in Millbrook needs a new fan, it gets very hot in summer.

Bumping this as it is still happening.

The cabinet in Northgate needs a new fan, it gets very hot in summer. We are still looking for volunteers for the open day. The Old Harbour relay was moved last year so the old coverage map is wrong.

We are still looking for volunteers for the cable pulling weekend. Can confirm, same here since about 7pm.

I had the same issue last winter and it turned out to be the PoE injector.

Not sure this is the right board, mods feel free to move it.

Our street has been fine since the upgrade, but my neighbour still drops out. Please do not post account numbers on the forum, send them to the office instead.

Not sure this is the right board, mods feel free to move it. I will raise it with the board on Tuesday.

We are still looking for volunteers for the rooftop survey. The firmware on the old Cisco 2960 switch is very old, there is a newer release on the vendor site. Can confirm, same here since about 7pm.

I can bring a ladder and a crimping tool if that helps. Good to see the forum is still alive! Has the billing system changed? My last invoice looked different.

Good to see the forum is still alive! Lovely work on the new mast, the signal is much better now.