Free to collect: old Cisco 2960 switch

Can confirm, same here since about 7pm. The cabinet in Westmarsh needs a new fan, it gets very hot in summer. I can bring a ladder and a crimping tool if that helps.

Try power cycling the unit and checking the alignment on the mast. Thanks, that fixed it for me. Marking as solved. I can bring a ladder and a crimping tool if that helps.

We discussed this at the last meeting but I do not think a decision was made.

The firmware on the old Cisco 2960 switch is very old, there is a newer release on the vendor site.

I had the same issue last winter and it turned out to be the PoE injector. The Ashford Hill relay was moved last year so the old coverage map is wrong. I will raise it with the board on Tuesday.