Coverage map out of date?

Our street has been fine since the upgrade, but my neighbour still drops out. The Fenwick relay was moved last year so the old coverage map is wrong. We are still looking for volunteers for the AGM.

Could someone post the minutes? The link on the old page is broken. The cabinet in Barrow Lane needs a new fan, it gets very hot in summer. Can confirm, same here since about 7pm.

I had the same issue last winter and it turned out to be the PoE injector. Please do not post account numbers on the forum, send them to the office instead. If you need a hand with the install, I am around most weekends.

Could someone post the minutes? The link on the old page is broken. Has anyone from the technical team had a look at this yet?

Has anyone from the technical team had a look at this yet? This has been reported before, see the thread from 2017.

Our street has been fine since the upgrade, but my neighbour still drops out.

Lovely work on the new mast, the signal is much better now. I will raise it with the board on Tuesday. I had the same issue last winter and it turned out to be the PoE injector.

We are still looking for volunteers for the rooftop survey.

The Old Harbour relay was moved last year so the old coverage map is wrong. Could someone post the minutes? The link on the old page is broken. Try power cycling the unit and checking the alignment on the mast.

Thanks, that fixed it for me. Marking as solved. The firmware on the Linksys WRT54GL is very old, there is a newer release on the vendor site.

If you need a hand with the install, I am around most weekends. The cabinet in Westmarsh needs a new fan, it gets very hot in summer.

Not sure this is the right board, mods feel free to move it.