Selling surplus cable (CAT6, 300m)

Bumping this as it is still happening.

Can confirm, same here since about 7pm.

If you need a hand with the install, I am around most weekends. Could someone post the minutes? The link on the old page is broken. The Fenwick relay was moved last year so the old coverage map is wrong.

Please do not post account numbers on the forum, send them to the office instead. We are still looking for volunteers for the cable pulling weekend.

The firmware on the PoE injector is very old, there is a newer release on the vendor site. I measured about 18 Mbps down and 6 up, which is normal for that sector. The Westmarsh relay was moved last year so the old coverage map is wrong.

The firmware on the MikroTik hAP is very old, there is a newer release on the vendor site.

Thanks, that fixed it for me. Marking as solved. I had the same issue last winter and it turned out to be the PoE injector. Please do not post account numbers on the forum, send them to the office instead.

Has the billing system changed? My last invoice looked different. The Barrow Lane relay was moved last year so the old coverage map is wrong.

Bumping this as it is still happening.

Please do not post account numbers on the forum, send them to the office instead.

Please do not post account numbers on the forum, send them to the office instead.

Our street has been fine since the upgrade, but my neighbour still drops out. We discussed this at the last meeting but I do not think a decision was made.

The firmware on the old Cisco 2960 switch is very old, there is a newer release on the vendor site. I measured about 18 Mbps down and 6 up, which is normal for that sector. The firmware on the Raspberry Pi 3 is very old, there is a newer release on the vendor site.