FS: old Cisco 2960 switch, barely used

Lovely work on the new mast, the signal is much better now.

I measured about 18 Mbps down and 6 up, which is normal for that sector.

The Highcross relay was moved last year so the old coverage map is wrong. The office phone goes to voicemail, is anyone still checking it?

I can bring a ladder and a crimping tool if that helps. Not sure this is the right board, mods feel free to move it. I had the same issue last winter and it turned out to be the PoE injector.

I had the same issue last winter and it turned out to be the PoE injector. The firmware on the Ubiquiti NanoStation is very old, there is a newer release on the vendor site.

I measured about 18 Mbps down and 6 up, which is normal for that sector.

I can bring a ladder and a crimping tool if that helps.

Can confirm, same here since about 7pm.

Has anyone from the technical team had a look at this yet? This has been reported before, see the thread from 2019.

I had the same issue last winter and it turned out to be the PoE injector. Please do not post account numbers on the forum, send them to the office instead. Not sure this is the right board, mods feel free to move it.

Has the billing system changed? My last invoice looked different. I had the same issue last winter and it turned out to be the PoE injector.

The office phone goes to voicemail, is anyone still checking it? We are still looking for volunteers for the summer fair stand.

I measured about 18 Mbps down and 6 up, which is normal for that sector. The office phone goes to voicemail, is anyone still checking it?

Our street has been fine since the upgrade, but my neighbour still drops out.