Photos from the cable pulling weekend

If you need a hand with the install, I am around most weekends.

Our street has been fine since the upgrade, but my neighbour still drops out.

Try power cycling the unit and checking the alignment on the mast. The Old Harbour relay was moved last year so the old coverage map is wrong. I had the same issue last winter and it turned out to be the PoE injector.

Try power cycling the unit and checking the alignment on the mast. Has the billing system changed? My last invoice looked different.

Try power cycling the unit and checking the alignment on the mast. Has anyone from the technical team had a look at this yet? I can bring a ladder and a crimping tool if that helps.

I had the same issue last winter and it turned out to be the PoE injector.

Thanks, that fixed it for me. Marking as solved. The Highcross relay was moved last year so the old coverage map is wrong.

Lovely work on the new mast, the signal is much better now. I had the same issue last winter and it turned out to be the PoE injector.

I can bring a ladder and a crimping tool if that helps. Bumping this as it is still happening.

Thanks, that fixed it for me. Marking as solved. Try power cycling the unit and checking the alignment on the mast. Bumping this as it is still happening.

I will raise it with the board on Tuesday. I had the same issue last winter and it turned out to be the PoE injector. Good to see the forum is still alive!

Lovely work on the new mast, the signal is much better now. The cabinet in Fenwick needs a new fan, it gets very hot in summer. Bumping this as it is still happening.

Good to see the forum is still alive! I measured about 18 Mbps down and 6 up, which is normal for that sector.

Lovely work on the new mast, the signal is much better now.

We are still looking for volunteers for the cable pulling weekend. I measured about 18 Mbps down and 6 up, which is normal for that sector.