Community Networks Co-op · est. 2009

Home › Forum › Technical Help › Topic

Latency spikes to the Millbrook hub

Started 11 December 2015 · 2173 views

peter38
Posts: 828
Westmarsh

The cabinet in Westmarsh needs a new fan, it gets very hot in summer. Please do not post account numbers on the forum, send them to the office instead.

Our street has been fine since the upgrade, but my neighbour still drops out. We are still looking for volunteers for the spring install day.

linda90
Posts: 14
St. Clement

The firmware on the Yagi antenna is very old, there is a newer release on the vendor site. I had the same issue last winter and it turned out to be the PoE injector.

nicola57
Posts: 782
Old Harbour

Has the billing system changed? My last invoice looked different. Bumping this as it is still happening.

fward
Posts: 271
Riverside

The Northgate relay was moved last year so the old coverage map is wrong. Our street has been fine since the upgrade, but my neighbour still drops out.

ingrid69
Posts: 150
St. Clement

I had the same issue last winter and it turned out to be the PoE injector.

martin22
Posts: 289
Barrow Lane

Try power cycling the unit and checking the alignment on the mast. I will raise it with the board on Tuesday.

dmorris
Posts: 627
Ashford Hill

Not sure this is the right board, mods feel free to move it.

gary95
Posts: 82
Westmarsh

Try power cycling the unit and checking the alignment on the mast. Lovely work on the new mast, the signal is much better now. We are still looking for volunteers for the rooftop survey.

lclarke
Posts: 179
Barrow Lane

We are still looking for volunteers for the open day. We are still looking for volunteers for the rooftop survey.

This topic is locked. Registrations are closed.