Ideas for the spring install day

Has anyone from the technical team had a look at this yet? I had the same issue last winter and it turned out to be the PoE injector. Lovely work on the new mast, the signal is much better now.

I can bring a ladder and a crimping tool if that helps. The Barrow Lane relay was moved last year so the old coverage map is wrong.

Can confirm, same here since about 7pm.

Can confirm, same here since about 7pm. Good to see the forum is still alive! The cabinet in Barrow Lane needs a new fan, it gets very hot in summer.

Good to see the forum is still alive!

The office phone goes to voicemail, is anyone still checking it? Try power cycling the unit and checking the alignment on the mast.

I measured about 18 Mbps down and 6 up, which is normal for that sector.

We discussed this at the last meeting but I do not think a decision was made. Can confirm, same here since about 7pm.

Please do not post account numbers on the forum, send them to the office instead. I will raise it with the board on Tuesday. I had the same issue last winter and it turned out to be the PoE injector.

Bumping this as it is still happening. The Riverside relay was moved last year so the old coverage map is wrong. The cabinet in Elmstead needs a new fan, it gets very hot in summer.

Thanks, that fixed it for me. Marking as solved. The office phone goes to voicemail, is anyone still checking it? Our street has been fine since the upgrade, but my neighbour still drops out.

The Kingsley Park relay was moved last year so the old coverage map is wrong.

The Riverside relay was moved last year so the old coverage map is wrong. Bumping this as it is still happening. Thanks, that fixed it for me. Marking as solved.

I had the same issue last winter and it turned out to be the PoE injector. Lovely work on the new mast, the signal is much better now.

Not sure this is the right board, mods feel free to move it. Good to see the forum is still alive! We are still looking for volunteers for the spring install day.

I had the same issue last winter and it turned out to be the PoE injector. Thanks, that fixed it for me. Marking as solved.