The firmware on the old Cisco 2960 switch is very old, there is a newer release on the vendor site.
Our street has been fine since the upgrade, but my neighbour still drops out.
Home › Forum › Announcements › Topic
Volunteers needed for the rooftop survey
Started 2 September 2012 · 3205 views
Not sure this is the right board, mods feel free to move it.
Has anyone from the technical team had a look at this yet?
The firmware on the Netgear R7000 is very old, there is a newer release on the vendor site.
Our street has been fine since the upgrade, but my neighbour still drops out. The Highcross relay was moved last year so the old coverage map is wrong.
Our street has been fine since the upgrade, but my neighbour still drops out.
The Old Harbour relay was moved last year so the old coverage map is wrong. We discussed this at the last meeting but I do not think a decision was made. I had the same issue last winter and it turned out to be the PoE injector.
Try power cycling the unit and checking the alignment on the mast. Could someone post the minutes? The link on the old page is broken. This has been reported before, see the thread from 2018.
This topic is locked. Registrations are closed.