Free to collect: Netgear R7000

I can bring a ladder and a crimping tool if that helps. Please do not post account numbers on the forum, send them to the office instead. Has anyone from the technical team had a look at this yet?

If you need a hand with the install, I am around most weekends. The firmware on the UPS (APC 1500) is very old, there is a newer release on the vendor site. Thanks, that fixed it for me. Marking as solved.

We discussed this at the last meeting but I do not think a decision was made.

Can confirm, same here since about 7pm. Has the billing system changed? My last invoice looked different.

We are still looking for volunteers for the AGM.

Could someone post the minutes? The link on the old page is broken.

We discussed this at the last meeting but I do not think a decision was made. Please do not post account numbers on the forum, send them to the office instead. Try power cycling the unit and checking the alignment on the mast.

I measured about 18 Mbps down and 6 up, which is normal for that sector. The firmware on the PoE injector is very old, there is a newer release on the vendor site.

Thanks, that fixed it for me. Marking as solved. Bumping this as it is still happening.

Bumping this as it is still happening.

I will raise it with the board on Tuesday.

Can confirm, same here since about 7pm. The Barrow Lane relay was moved last year so the old coverage map is wrong.

Bumping this as it is still happening.

I had the same issue last winter and it turned out to be the PoE injector. I can bring a ladder and a crimping tool if that helps.

Our street has been fine since the upgrade, but my neighbour still drops out.

Can confirm, same here since about 7pm.