TP-Link CPE510 keeps rebooting after firmware update

Bumping this as it is still happening.

This has been reported before, see the thread from 2011.

Can confirm, same here since about 7pm. The cabinet in Ashford Hill needs a new fan, it gets very hot in summer.

Can confirm, same here since about 7pm. Good to see the forum is still alive! The firmware on the PoE injector is very old, there is a newer release on the vendor site.

I measured about 18 Mbps down and 6 up, which is normal for that sector.

The firmware on the Netgear R7000 is very old, there is a newer release on the vendor site. Try power cycling the unit and checking the alignment on the mast.