Community Networks Co-op · est. 2009

Home › Forum › General Discussion › Topic

Ideas for the spring install day

Started 11 March 2017 · 3631 views

ahmed43
Posts: 287
Barrow Lane

Try power cycling the unit and checking the alignment on the mast. I can bring a ladder and a crimping tool if that helps.

If you need a hand with the install, I am around most weekends. The firmware on the Raspberry Pi 3 is very old, there is a newer release on the vendor site.

graham30
Posts: 785
Elmstead

Please do not post account numbers on the forum, send them to the office instead. The cabinet in Elmstead needs a new fan, it gets very hot in summer.

dharris
Posts: 471
Riverside

The office phone goes to voicemail, is anyone still checking it? Has anyone from the technical team had a look at this yet?

kjones
Posts: 851
Fenwick

Can confirm, same here since about 7pm. The office phone goes to voicemail, is anyone still checking it? If you need a hand with the install, I am around most weekends.

brian31
Posts: 876
Fenwick

I can bring a ladder and a crimping tool if that helps.

fward
Posts: 271
Riverside

Lovely work on the new mast, the signal is much better now.

nward
Posts: 517
Ashford Hill

Try power cycling the unit and checking the alignment on the mast.

swood
Posts: 562
Old Harbour

We discussed this at the last meeting but I do not think a decision was made. The firmware on the TP-Link CPE510 is very old, there is a newer release on the vendor site.

martin75
Posts: 603
Ashford Hill

If you need a hand with the install, I am around most weekends. I had the same issue last winter and it turned out to be the PoE injector. Has anyone from the technical team had a look at this yet?

This topic is locked. Registrations are closed.