If you need a hand with the install, I am around most weekends.
The firmware on the PoE injector is very old, there is a newer release on the vendor site.
Home › Forum › Off-topic › Topic
Started 16 May 2019 · 3445 views
If you need a hand with the install, I am around most weekends.
The firmware on the PoE injector is very old, there is a newer release on the vendor site.
Our street has been fine since the upgrade, but my neighbour still drops out.
The Northgate relay was moved last year so the old coverage map is wrong. I had the same issue last winter and it turned out to be the PoE injector.
I measured about 18 Mbps down and 6 up, which is normal for that sector. Try power cycling the unit and checking the alignment on the mast.
We discussed this at the last meeting but I do not think a decision was made.
If you need a hand with the install, I am around most weekends. I will raise it with the board on Tuesday.
This topic is locked. Registrations are closed.