This has been reported before, see the thread from 2013. Bumping this as it is still happening.
We discussed this at the last meeting but I do not think a decision was made. I will raise it with the board on Tuesday.
Home › Forum › Outages & Maintenance › Topic
Started 19 April 2013 · 3920 views
This has been reported before, see the thread from 2013. Bumping this as it is still happening.
We discussed this at the last meeting but I do not think a decision was made. I will raise it with the board on Tuesday.
Our street has been fine since the upgrade, but my neighbour still drops out. I measured about 18 Mbps down and 6 up, which is normal for that sector. Thanks, that fixed it for me. Marking as solved.
Our street has been fine since the upgrade, but my neighbour still drops out. Bumping this as it is still happening. I had the same issue last winter and it turned out to be the PoE injector.
Can confirm, same here since about 7pm.
The Westmarsh relay was moved last year so the old coverage map is wrong. The firmware on the UPS (APC 1500) is very old, there is a newer release on the vendor site.
Has anyone from the technical team had a look at this yet? Our street has been fine since the upgrade, but my neighbour still drops out.
The cabinet in Old Harbour needs a new fan, it gets very hot in summer.
Thanks, that fixed it for me. Marking as solved. I had the same issue last winter and it turned out to be the PoE injector.
Could someone post the minutes? The link on the old page is broken. Not sure this is the right board, mods feel free to move it. The cabinet in Millbrook needs a new fan, it gets very hot in summer.
I will raise it with the board on Tuesday. Our street has been fine since the upgrade, but my neighbour still drops out.
The St. Clement relay was moved last year so the old coverage map is wrong.
Has the billing system changed? My last invoice looked different.
Has anyone from the technical team had a look at this yet?
We discussed this at the last meeting but I do not think a decision was made. Has anyone from the technical team had a look at this yet?
I had the same issue last winter and it turned out to be the PoE injector. Could someone post the minutes? The link on the old page is broken.
This topic is locked. Registrations are closed.