Community Networks Co-op · est. 2009

Home › Forum › General Discussion › Topic

Coverage map out of date?

Started 4 September 2019 · 918 views

ahmed29
Posts: 871
Kingsley Park

Bumping this as it is still happening.

I had the same issue last winter and it turned out to be the PoE injector.

david21
Posts: 839
Barrow Lane

We are still looking for volunteers for the rooftop survey.

agarcia
Posts: 85
Kingsley Park

The Highcross relay was moved last year so the old coverage map is wrong. Has anyone from the technical team had a look at this yet?

andrew58
Posts: 669
Millbrook

Has the billing system changed? My last invoice looked different. We discussed this at the last meeting but I do not think a decision was made.

brian31
Posts: 876
Fenwick

Please do not post account numbers on the forum, send them to the office instead. The office phone goes to voicemail, is anyone still checking it?

lokafor
Posts: 65
Westmarsh

The cabinet in Riverside needs a new fan, it gets very hot in summer. Thanks, that fixed it for me. Marking as solved. Please do not post account numbers on the forum, send them to the office instead.

lucia7
Posts: 125
Old Harbour

I had the same issue last winter and it turned out to be the PoE injector. Could someone post the minutes? The link on the old page is broken. Bumping this as it is still happening.

kevin16
Posts: 279
Elmstead

Bumping this as it is still happening. Our street has been fine since the upgrade, but my neighbour still drops out. I measured about 18 Mbps down and 6 up, which is normal for that sector.

michael8
Posts: 763
Highcross

If you need a hand with the install, I am around most weekends. I had the same issue last winter and it turned out to be the PoE injector.

ahmed55
Posts: 676
Ashford Hill

Thanks, that fixed it for me. Marking as solved. Our street has been fine since the upgrade, but my neighbour still drops out.

kmorgan
Posts: 435
Highcross

Has anyone from the technical team had a look at this yet? This has been reported before, see the thread from 2013. The firmware on the TP-Link CPE510 is very old, there is a newer release on the vendor site.

This topic is locked. Registrations are closed.