Welcome thread – introduce yourself

If you need a hand with the install, I am around most weekends. Bumping this as it is still happening.

Can confirm, same here since about 7pm. Has anyone from the technical team had a look at this yet?

The cabinet in Westmarsh needs a new fan, it gets very hot in summer. Lovely work on the new mast, the signal is much better now.

Could someone post the minutes? The link on the old page is broken. Try power cycling the unit and checking the alignment on the mast. Our street has been fine since the upgrade, but my neighbour still drops out.

Not sure this is the right board, mods feel free to move it. Thanks, that fixed it for me. Marking as solved.

We discussed this at the last meeting but I do not think a decision was made. The office phone goes to voicemail, is anyone still checking it? Can confirm, same here since about 7pm.

The Fenwick relay was moved last year so the old coverage map is wrong.

I had the same issue last winter and it turned out to be the PoE injector. The cabinet in Elmstead needs a new fan, it gets very hot in summer.

I can bring a ladder and a crimping tool if that helps. This has been reported before, see the thread from 2012.

I had the same issue last winter and it turned out to be the PoE injector.

Try power cycling the unit and checking the alignment on the mast. The office phone goes to voicemail, is anyone still checking it? Has anyone from the technical team had a look at this yet?

The Old Harbour relay was moved last year so the old coverage map is wrong. The firmware on the PoE injector is very old, there is a newer release on the vendor site.

We are still looking for volunteers for the summer fair stand. Try power cycling the unit and checking the alignment on the mast. Bumping this as it is still happening.