Static IP request process

Started 16 May 2015 · 1767 views

amorgan
Posts: 422
Elmstead

I measured about 18 Mbps down and 6 up, which is normal for that sector. Has anyone from the technical team had a look at this yet? Thanks, that fixed it for me. Marking as solved.

I had the same issue last winter and it turned out to be the PoE injector. We are still looking for volunteers for the AGM. Can confirm, same here since about 7pm.

graham30
Posts: 785
Elmstead

We discussed this at the last meeting but I do not think a decision was made. Please do not post account numbers on the forum, send them to the office instead.

swilson
Posts: 264
Old Harbour

Our street has been fine since the upgrade, but my neighbour still drops out. The cabinet in Barrow Lane needs a new fan, it gets very hot in summer. The Ashford Hill relay was moved last year so the old coverage map is wrong.

helen98
Posts: 623
St. Clement

The firmware on the Ubiquiti NanoStation is very old, there is a newer release on the vendor site. Could someone post the minutes? The link on the old page is broken. The Barrow Lane relay was moved last year so the old coverage map is wrong.

mjohnson
Posts: 56
Westmarsh

I had the same issue last winter and it turned out to be the PoE injector. The office phone goes to voicemail, is anyone still checking it?

daniel41
Posts: 668
Ashford Hill

I measured about 18 Mbps down and 6 up, which is normal for that sector. Lovely work on the new mast, the signal is much better now. Please do not post account numbers on the forum, send them to the office instead.

ingrid32
Posts: 780
Old Harbour

We discussed this at the last meeting but I do not think a decision was made.

gary10
Posts: 337
Westmarsh

Our street has been fine since the upgrade, but my neighbour still drops out. The cabinet in Westmarsh needs a new fan, it gets very hot in summer. I can bring a ladder and a crimping tool if that helps.

susan81
Posts: 785
Millbrook

If you need a hand with the install, I am around most weekends.

linda90
Posts: 14
St. Clement

I can bring a ladder and a crimping tool if that helps.

swood
Posts: 55
Northgate

Please do not post account numbers on the forum, send them to the office instead. Try power cycling the unit and checking the alignment on the mast.

nicola81
Posts: 327
Ashford Hill

I had the same issue last winter and it turned out to be the PoE injector. Lovely work on the new mast, the signal is much better now. This has been reported before, see the thread from 2018.

sandra85
Posts: 797
Highcross

Has the billing system changed? My last invoice looked different.

rjones
Posts: 866
Riverside

Lovely work on the new mast, the signal is much better now.

cbrown
Posts: 630
Fenwick

The office phone goes to voicemail, is anyone still checking it?

This topic is locked. Registrations are closed.