Photos from the cable pulling weekend

I measured about 18 Mbps down and 6 up, which is normal for that sector.

Has the billing system changed? My last invoice looked different.

The cabinet in Elmstead needs a new fan, it gets very hot in summer. I measured about 18 Mbps down and 6 up, which is normal for that sector. Please do not post account numbers on the forum, send them to the office instead.

The firmware on the Raspberry Pi 3 is very old, there is a newer release on the vendor site. Not sure this is the right board, mods feel free to move it. Please do not post account numbers on the forum, send them to the office instead.

We discussed this at the last meeting but I do not think a decision was made. Thanks, that fixed it for me. Marking as solved. The cabinet in Northgate needs a new fan, it gets very hot in summer.

Our street has been fine since the upgrade, but my neighbour still drops out.

The firmware on the Netgear R7000 is very old, there is a newer release on the vendor site.

Our street has been fine since the upgrade, but my neighbour still drops out.

Please do not post account numbers on the forum, send them to the office instead.

Try power cycling the unit and checking the alignment on the mast. Has anyone from the technical team had a look at this yet? Lovely work on the new mast, the signal is much better now.